Ships from the USA — orders leave within 1–2 business days

Short answer: A water-resistance rating in meters (30m, 50m, 100m) is a laboratory test pressure, not a safe diving depth. Roughly: 30m means splashes and rain only, 50m handles showering and light swimming, 100m handles swimming and snorkelling, and only watches marked "DIVER'S" are certified for scuba diving. For a vintage or pre-owned watch, assume the rating no longer applies until it has passed a fresh pressure test — seals age.

Why doesn't 30m mean I can go 30 meters deep?

The number is the static pressure the watch withstood in a test — the pressure of a still 30-meter water column. Real life isn't still: moving your arm through water, diving in, or a jet of water from a tap all create brief pressure spikes, and temperature changes make seals contract. That's why a "30m" watch isn't meant for swimming at all (WatchGecko, "Water resistance — the truth is out there").

What does each rating mean in practice?

This is the widely used guide based on the ISO standards (summarised by Wikipedia, "Water Resistant mark"):

Marking Also written as Practical use
Water resistant 30m 3 atm / 3 bar Splashes, rain, hand-washing. Not for swimming or bathing.
Water resistant 50m 5 atm / 5 bar Showering, bathing, shallow swimming. Not diving.
Water resistant 100m 10 atm / 10 bar Swimming, snorkelling, recreational water sports. Not scuba.
Water resistant 200m 20 atm / 20 bar Serious water sports and skin diving.
DIVER'S 100m–300m ISO 6425 Scuba diving.
DIVER'S 300m+ (mixed-gas) ISO 6425 Saturation diving with helium.

"Water resistant" with no number at all usually means splash-resistant only.

What are ISO 2281, ISO 22810 and ISO 6425?

  • ISO 2281 (introduced 1990) set the tests for everyday water-resistant watches — immersion, thermal shock and overpressure tests. It has been replaced by ISO 22810:2010.
  • ISO 6425 (first published 1984, revised since) is the much stricter divers' watch standard. A compliant diver must be rated to at least 100 m, is tested at 125% of its rated pressure, and is marked "DIVER'S WATCH xxx M" or "DIVER'S xxx M".

(Source: Wikipedia, "Water Resistant mark"; see also Wikipedia, "Diving watch".)

So a watch that says "200m" but not "DIVER'S" may be very capable, but it hasn't been certified to the diver standard. If you want a dive watch for actual diving, look for the DIVER'S marking.

Why are vintage and pre-owned watches different?

Water resistance depends on small rubber or polymer gaskets at the case back, crown and crystal. Over years those seals harden, shrink or crack, and crystals can develop tiny cracks — so a watch that was rated 100m in 1980 may not keep out a shower today. Watchmakers' consistent advice is: unless a vintage watch has had its seals replaced and passed a recent pressure test, don't trust it in water, whatever the case back says (Chronoexpert, vintage watch water resistance; Charles Martin Watch Co., "Can you swim with a vintage watch?"; Gray & Sons, water resistance ratings). Many retailers and brands recommend a pressure test roughly once a year for any watch you wear in water.

Two more vintage-specific points:

  • Old wording. Watches from before about 1970 often say "Water Proof". That term was phased out (on Seiko, for example, "Water Resist" had replaced it on almost all models by 1971 — see our Seiko reference guide). It doesn't mean the watch is more water-tight than a modern one.
  • Crowns. A screw-down crown only seals when it's screwed fully in. A push-pull crown left pulled out lets water straight in.

How we describe water resistance at Bido

For pre-owned watches, we don't promise water resistance. A rating printed on a case back describes the watch when it was new, not today. Our pre-owned watches are sold as described; unless a listing specifically says a watch has been pressure-tested, treat it as not water-resistant and keep it dry until a watchmaker has tested it.

If you want a watch for the pool or the beach, a sturdy option such as a pre-owned G-Shock or a rubber- or NATO-strap sports watch from Classic Pre-Owned is a good start — then have it tested. And if you do get a watch wet, a rubber or NATO strap from Watch Accessories will cope far better than leather. For everyday care, see Watch care in five minutes.

FAQ

Can I swim with a 30m watch? No. 30m (3 atm) is for splashes and rain only.

Can I swim with a 50m watch? Light swimming is generally fine on a modern, well-maintained 50m watch; 100m is the safer choice for regular swimming.

Can I shower with my watch? Hot water and soap can degrade seals over time, even on water-resistant watches. Many watchmakers advise taking it off.

Is 100m water resistance enough for scuba diving? Only if the watch is certified to ISO 6425 and marked "DIVER'S 100m". A plain "100m" rating is for swimming and snorkelling.

Is my vintage dive watch still water-resistant? Assume not until it has passed a pressure test after its gaskets were replaced.

How much does a pressure test cost? It varies by watchmaker; many do a dry pressure test quickly as part of a service or battery change. Ask your local watchmaker for a quote.

What does "atm" or "bar" mean on my watch? Both are units of pressure. 10 atm ≈ 10 bar ≈ a 100 m rating.

Before you go

5% off your first order

Join our newsletter for new arrivals, care tips and member offers — and get a 5% code right away.

You'll get occasional emails about new arrivals and offers. Unsubscribe anytime. Privacy policy